Glamox NL95, User Manual, Page: 26 / 54

Rev.: 4 , Print date: 202 1 - 05 - 05 22
NL95
MODULE 1. ITNL-10-D
CONNECTIONS
SELECT REGISTERED MODULE
1. ITNL-10-D
2. ITNL-10-D
MODULE 1. ITNL-10-D
9
6
7
Tap on to fill selected module with
unconnected lights.
Tap on to disconnect all lights from
the selected module. All lights will
be moved to unconnected lights list.
MODULE 1. ITNL-10-D
3
6 8 7
5
1 2
3
1 List on unconnected lights
2 Selection of modules, to change
module tap on . Registered
module address and type is shown.
Select unconnected light. 3
4 Tap on the arrow right to light name.
Automatcailly light will be assigned to
first empty connector (if exists).
4
OR
4
5 Tap on empty row under the selected
module.
When finished connecting all lights,
tap on to return back to
configuration main screen
8
3 Select connected light. 9
4
Tap on the arrow left to light name.
Light automatically will be disconnected
from module
10
10
11
12
Lights connected to selected registered module
11
12
Select module or
Tap on return key
In this screen, lights are connected / assigned to specific input on specified modules.
Connecting is done by moving unconnected lights located on left side of screen to specific module located on
right side of screen. Single lights are represented with light number and light name while double lights are
represented with light number with suffix -M (for main light) and -S (for spare light) and light name.
Modules input are represented with Lt. and number of input. Double modules will have double light marking Lt
where upper represents main and lower represents spare. Lights can be connected to modules in different
ways, for example:
- single light can be assigned to double module, (only one channel of double input will be used)
- double light can be assigned to single module, (double light will use two inputs on single module)
- double light can be assigned to two modules
Tap on list button , right to module name, to open registered modules list and choose another module or
Tap on to return back.
NOTE: only registered modules will be shown in this list.
Tap on list icon to
select registered module
from list