Rev.:
4
, Print date: 202
1
-
05
-
05
7
NL95
System contains dangerous voltages when connected to line voltages. Only a
competent technician should carry out the installation
/
service.
IMPORTANT!!!
Navigation and
S
ignal
L
ights
C
ontroller needs to be installed in accordance with rules and
regulations of classification societies as well as in accordance with good electrotechnical
practice.
Use of non appropriate lights could lead to irregular operation of Navigation and
S
ignal
L
ights
C
ontroller and navigation lights which could indanger safe navigation of the ship. Special
precautions need to be taken to check the compatibility of non-bulb and non-Glamox LED
lights.
Operating manual of used navigation and signal lights needs to be considered.
2. Safety instructions
Do not touch the electrical parts when power supply line is connected.
While repairs or inspection is made, the power supply line must be disconnected.
"P
OWER ON/OFF”
switch does not disconnect the power supply line. Power
supply line is still present on terminals,
P
ower
S
upply module
,
and
I
nput
modules.
Navigation and
S
ignal
L
ights
C
ontroller is open equipment. That is,
equipment
may
only be installed in consoles and cabinets which provide front panel access for
operating devices (main unit). Power
S
upply and
I
nput modules must be easily
reachable in case of manual operation of lights.
For manual operating of lights special precautions needs to be taken in order that
“live parts” are not touched. For manual operation of lights use only insulated
screwdriver.
Summary of Contents for NL95
Page 1: ...Rev 4 Print date 2021 05 05 NL95 Touch Screen Navigational Light Controller NL95 User manual ...
Page 2: ...Rev 4 Print date 2021 05 05 NL95 ...
Page 42: ...Rev 4 Print date 2021 05 05 38 NL95 6 2 Configuration setup form ...
Page 51: ...Rev 4 Print date 2021 05 05 47 NL95 9 2 Configuration setup form ...