GlammFire.
PAG./17
5.7 – Home Automation (Option)
The Crea7ionEVO PLUS is equipped with a plug intended for the home automation connection (Figure 1) which must
be carried out by a qualified technician.
This option allows the burner to be switched on or off through the system installed in the room.
To connect to the home automation system, unscrew the four screws from the technical box and remove the existing
protective cover (Figure 2).
Sealed technical box with plug for home
automation
Figure 1
— Identification box home automation connection
Figure 2
— Box opening to access home automation
Note:
For the functionality of the home automation system, the device must be
switched on in standby mode (receiving energy) otherwise its functionality
will not be successful. The device will only be able to receive the proper
pulses to switch it on / off this way.
