37 |
Wheel & Rim Safety Manual
5
5. Activate the hydraulic pump and apply
enough pressure to depress the flange about
¾” - 1” (19 - 25 mm). While applying
pressure, the operator should stand to the
side and hold the tool with one hand.
This allows control should the tool not seat
properly and fly off. If necessary, release the
pressure and readjust the ram adjusting screw.
6a
6b
6. While the flange is depressed, place a nut or
similar object between the flange and the lip
of the bead seat band.
WARNING:
Do not put
your fingers under the bead seat band.
Lay object on the rim flange and slide it into
position with screwdrivers.
