Proper equipment & tools for servicing
12 |
Wheel & Rim Safety Manual
Use only recommended tools and equipment for mounting and demounting off-highway tires and
servicing wheels and rims to achieve optimal safety. Use of proper tools prevents damage to the rim and
components. The use of improper tools or equipment can cause personal injury.
The following tools are required to service the various types of multi-piece rims included in this manual:
The following equipment may be required:
A. Hardwood Blocks
B. Valve Extension Tool
C. Set of Cap and Core Removal Tools
D. Wire Brush
E. Chain or Cable Slings of Adequate Length
F. Bead Lubricant (Non-Petroleum Base)
G. Sledge Hammer
H. Rubber Mallet or Equivalent (e.g. Babbitt Hammer)
I. Inflation Hose with Clip-On Chuck, In-line Gauge and Control Valve.
1.
Air-Hydraulic Pump and 50-Ton Jack:
Air supplied to the pump develops hydraulic
pressure to lift the jack. This equipment is
essential in servicing extra-heavy construction
equipment.
2.
Air Hydraulic Pump:
The pump activates
hydraulic tools, such as the bead breakers and
hydraulic rams.
3.
Air Wrenches:
Air wrenches and their sockets
are used to tighten and loosen nuts on wheel
assemblies.
4.
Bead Breaker:
This type of bead breaker is
used for loosening tires from bead seats when
the rim has prying slots.
