USER MANUAL
POSITION CONTROLLER THESI 310
MT02_A37_A_TH310_GIVI_ENG rev. E
Pag. 30/44
3) Led and segments switching on test
8.8.8.8.
Press
to switch on all the led and
display segments
- 8.8.8.8.8.8.
4) Axis display test
P 89
Press
the values “0123456789” will be
shown in sequence on the
display
4 5 6 7 8 9 .
5) Led test
P 89
Press
the axis and keyboard led will be
switched on in sequence
-
6) Inputs test
P 89
Press
to see the status of the inputs
(1 = active)
0 0 0 0 0 0
according to the following table:
--
DEVIATION
PRESET
INC. CYCLE
START
STOP
0 0 0 0 0 0
P 89
Example:
INCREASE CYCLE input active
0 0 0 1 0 0
P 89
Press
to quit testing and go back to
parameters selection
_ _ _ _ _ _
Press
to quit configuration and go back
to the position display
2 0 0.0