USER MANUAL
POSITION CONTROLLER THESI 310
MT02_A37_A_TH310_GIVI_ENG rev. E
Pag. 23/44
Parameter 20
– SELECTING “AUTOMATIC INERTIA CALCULATION” OPTION
This parameter allows to enable/disable the possibility of automatically calculating the
system inertia at low speed, during positioning.
Example of selection: enabling
P 20
Press
to select the parameter
(see PARAM. SELECTION)
n o
P 20
Press
to confirm the selection and
enter its settings
n o*
P 20
Press
to choose the desired selection
y E S*
P 20
Press
to confirm and go back to
parameters selection
y E S
Press
to quit configuration and go back
to the position display
2 0 0.0
Parameter 21
– SELECTING “REQUESTED POSITIONING DISPLAY” OPTION
This parameter allows to enable/disable the displaying of the required position instead of
the real position, at the end of a positioning within the tolerance range.
Example of selection: disabling
P 21
Press
to select the parameter
(see PARAM. SELECTION)
y E S
P 21
Press
to confirm the selection and
enter its settings
y E S*
P 21
Press
to choose the desired selection
n o*
P 21
Press
to confirm and go back to
parameters selection
n o
Press
to quit configuration and go back
to the position display
2 0 0.0
