USER MANUAL
POSITION CONTROLLER THESI 310
MT02_A37_A_TH310_GIVI_ENG rev. E
Pag. 29/44
Parameter 89
– INSTRUMENT DIGNOSTICS
With this parameter, it is possible to perform some tests to verify the correct functioning of:
encoder, keyboard, axis display, led and inputs.
Example of instrument diagnostics
P 89
Press
to select the parameter
(see PARAM. SELECTION)
_ _ _ _ _ _
1) Encoder test
This allows to test the reading of the encoder pulses.
P 89
1 2 3.4
2) Keyboard test
P 89
Press
the code of the pressed key will
be displayed
c 0 0 0
Press all the keys. To each key will correspond a code, as shown in the table below:
Key
Code
Key
Code
Key
Code
Key
Code
1 001 5 401 9 302
automat
601
2 101 6 002 0 402
enter
3 201 7 102 P 501
stop
4 301 8 202 +/- 502
start
702
Example:
P 89
Press
the code of the pressed key will
be displayed
c 1 0 1
P 89
Press
the code of the pressed key will
be displayed
c 4 0 2
P 89
Press
the code of the pressed key will
be displayed
c 6 0 1
