8
Swiss Lifting Solutions
General operating conditions:
• Ambient temperature ............................. : -15 °C to +50 °C
• Humidity ................................................. : max. 80% relative humidity
• Protection class ..................................... : IP 65
• Electromagnetic compatibility ................ : Immunity, industrial area
We recommend to equip GIS chain hoists working outdoors with a shelter to protect against the weather. Special operating conditions can
be agreed in individual cases with the manufacturer. After consultation, appropriate, optimised equipment, and important information for
safe, low-wear use can be supplied. The intended use of the electric chain hoist likewise assumes the adherence to the operating, mainte-
nance and servicing prescribed by the manufacturer.
Ensure that only one type of electric chain hoist from the same manufacturer with the same lifting speed is used to lift each assembly.
Electric chain hoists with different lifting capacities/speeds should not be used for the same manipulation. Note that electric chain hoists
with different lifting capacities can run at different speeds even if the same lifting speed is cited on the type plate.
The electric chain hoists in the LP series are designed for provision and use at events. Events include concerts, shows, events, conven-
tions, conferences, exhibitions, presentations, demonstrations, cinema or television recordings and the like. Venues include theatres,
multi-purpose halls, studios, production facilities for film, television and radio, concert halls, convention centres, schools, exhibitions, trade
fairs, museums, discos, variety shows, theme parks, sports facilities, open air theatres and open-air events.
The IGVW (entertainment technology industry association) differentiates between three types of electric chain hoists:
D8 electric chain hoist
In the context of this quality standard, a D8 electric chain hoist complies with the requirements stipulated in DIN EN 14492-2 and shall not
be used for holding or moving loads above people without employing additional protective measures.
The electric chain hoists of the LP types are lifting equipment for various loads. They can be installed as stationary or mobile units, while
a lateral oscillation must be ensured. The electric chain hoists are manufactured in accordance with the latest technical developments and
recognised safety standards, and are tested for safe operation by the manufacturer. Electric chain hoists are approved by various interna-
tional classification societies such as TÜV and others. Electric chain hoists of the above types may only be used when in an acceptable
technical condition, in accordance with their intended use, by trained personnel in a safe and responsible manner.
0.6 Appropriate use
0.5.2 Warranty
The warranty is void if the installation, operation, testing and maintenance is not carried in accordance with this instruction manual. Re-
pairs and troubleshooting under warranty may only be carried out by qualified persons after consultation and agreement with the manufac-
turer/supplier. Any modifications to the product or the use of non-original spare parts will void the warranty.
0.5.1 Periodic checks
Each device/unit operator should adequately note all checks, maintenance and inspections performed in the inspection pass, and have
these confirmed by the competent person in charge. Incorrect or missing entries will lead to forfeiture of the manufacturer's warranty.
The devices are to be checked periodically by a specialist. Primarily, visual and functional checks are to be carried out, whe-
reby the state of components with respect to damage, wear, corrosion or any other changes is determined. In addition, safety
equipment is assessed for completeness and efficiency. It may be necessary to dismantle the equipment to correctly assess
wear parts.
Load-bearing parts must be inspected over their entire length, including covered or hidden parts.
All periodical inspections should be arranged by the operator.
