Girard Systems 98GC2762B, Programming Manual

Page: 3 / 11

3
CONTENTS
The G-Link System …………………………………………………………………………. . 3
Product Description ………………………………………………………………………… . 4
Programming ……………………………………………………………….………………… . 6
GC136 AC Motor Controller ……………………………………………………………… . 6
GC274B / GC274C AC motor Controllers …………………………………………... . 7
98GC74 AC Motor Controller ………………………………… . …………………………. 8
GC732G DC Motor Controller ……………………………………………………………. 9
GC1146C DC Motor Controller …………………………………………………………. 10
THE G – LINK SYSTEM
The G-Link motors and control modules provided by Girard Systems communicate by
use of RF signals on a frequency of 433.92 MHZ. This eliminates the need for wiring
and the drilling of holes in the vehicle. These components must be electronically
matched, programmed or paired before use. This is usually done at the Girard Systems
factory. Should the need arise for the user to pair a device with the motor controller
they must refer to the appropriate manual for the devices applicable to their
installation.