9
GC732G DC Motor Controller
Fig.7
To pair the Remote handset with a GC732G Motor controller, follow the steps below.
Note; when carrying out this part of the procedure each step must be executed
within 10 seconds of the previous one or the module will revert to factory settings.
It is highly recommended that you read and understand the following sequence
before attempting to execute it.
1)
Ensure that there is power supplied to the Motor controller.
2)
Press the Program button on the Motor controller. (The Red LED will start
blinking)
3)
Press the STOP button on the Motor Controller. (The Red LED will remain ON)
4)
Select the desired channel on the remote handset
5)
Press the IN button on the handset. (The Red LED will extinguish)
6)
Press the OUT, STOP and IN buttons alternately on the handset to ensure that
the Modules have been successfully paired.
Program Button
