Please read this manual before operating your headset, and keep it for future reference.
Images used in this user manual may differ in appearance from the actual product.
Copyright
Copyright © 2010 Samsung Electronics
This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or transmitted in any form or by
any means, electronic or mechanical, including photocopying, recording, or storing in any information
storage and retrieval system, without the prior written permission of Samsung Electronics.
Trademarks
SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung Electronics.
•
Bluetooth
•
®
is a registered trademark of the Bluetooth SIG, Inc. worldwide.
More information about Bluetooth is available at www.bluetooth.com.
All other trademarks and copyrights are the property of their respective owners.
•
Button functions
Button
Function
Power
switch
Slide the switch to turn the headset on or off.
Talk
Press and hold to enter Pairing mode.
•
Press to make or answer a call.
•
Press to end a call.
•
Volume
Press to adjust the volume.
•
Press and hold to turn the microphone on or off.
•
In Pairing mode, press and hold the Volume up button to
•
turn the Multi-point feature on.
In Pairing mode, press and hold the Volume down button to
•
turn the Multi-point feature off.
You can hear a beep when the volume level of the headset reaches it’s lowest
or highest level.
Using your headset
This section explains how to turn the headset on, pair and connect to the phone,
and use various functions.
Activated functions and features may differ depending on the phone type.
•
Some devices, especially those that are not tested or approved by Bluetooth
•
SIG, may be incompatible with your headset.
To ensure you get the best performance from your headset.
Keep the distance between your headset and device as small as possible
•
and avoid placing your body or other objects in the signals path.
If you usually use your mobile phone with your right hand, wear the headset
•
on your right ear.
Covering your headset or device could effect its performance so keep
•
contact to a minimum
Turning the headset on or off
To turn the headset on, slide up the power switch. The blue indicator light
•
flashes 4 times.
To turn the headset off, slide down the power switch. The indicator light
•
flashes red then turns off.
Charging the headset
This headset has a rechargeable internal battery which is non-removable.
Ensure that you fully charge the battery before using the headset for the first
time.
1
Plug the small end of the USB cable into the charger jack.
2
Plug the large end of the USB cable into a USB port on a Computer or an
approved Samsung 5 volt DC output USB charger.
During charging, the indicator light will turn red. If charging does not begin,
unplug the USB cable and plug it in again.
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two Bluetooth
enabled devices, such as a Bluetooth phone and a Bluetooth headset.
To use the headset with other Bluetooth devices, the devices must be paired.
When trying to pair the two devices, keep the headset and the phone reasonably
close together. After pairing, the two devices will connect automatically when
switched on.
Pairing and connecting the headset with a phone
1
Enter Pairing mode.
With the headset turned on, press and hold the Talk button until the blue
•
indicator light stays lit.
If you are turning on the headset for the first time, it will go into Pairing
•
mode immediately.
2
Activate the Bluetooth feature on your phone and search for the headset (see
your phone’s user manual).
3
Select the headset (HM1100) from the list of devices found by your phone.
Please read all Safety precautions before using your headset to ensure safe and proper use.
Safety precautions
When using your headset while driving, follow local regulations in the region you are in.
•
Never disassemble or modify your headset for any reason. Doing this may cause the headset to
•
malfunction or become combustible. Bring the headset to an authorised service centre to repair it.
Keep your device and all accessories out of the reach of small children or animals. Small parts may
•
cause choking or serious injury if swallowed.
Avoid exposing your device to very cold or very hot temperatures (below 0° C or above 45° C).
•
Extreme temperatures can cause the deformation of the device and reduce the charging capacity
and life of your device.
Do not allow your device to get wet — liquids can cause serious damage. Do not handle your
•
device with wet hands. Water damage to your device can void your manufacturer’s warranty.
Avoid using your device’s light close to the eyes of children or animals.
•
Do not use the device during a thunderstorm. Thunderstorms can cause the device to malfunction
•
and increase the risk of electric shock.
Excessive exposure to sound at high volumes can cause hearing damage.
Always turn the volume down before plugging the earphones into an audio
source and use only the minimum volume setting necessary to hear your
conversation or music.
3
When the headset is fully charged, the indicator light changes to blue. Unplug
the USB cable from the Computer and the headset.
If no Computer or USB charger is available you can also use a Samsung
•
Travel charger.
Use only Samsung-approved chargers. Unauthorised or Non-Samsung
•
chargers may cause an explosion or damage to the headset and could
invalidate any warranty on the product.
The battery will gradually wear out while charging or discharging as it is
•
a consumable part.
Never make or receive calls while charging, always disconnect your headset
•
from the charger and answer the call.
When the battery charge gets low
The headset beeps and the indicator light flashes red. Recharge the battery. If
the headset powers off during a call, the call will be automatically transferred to
the phone.
Checking the battery level
To check the battery level, hold down the Volume down button and the Talk
4
If requested, enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the
headset to your phone.
Your headset supports the Simple Pairing feature which allows the headset to
be paired with a phone without requesting a PIN. This feature is available for
phones that are compliant with Bluetooth version 2.1 or higher.
The headset can also be paired via the Active pairing feature, see page 13.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected to 2
Bluetooth phones at the same time.
1
After connecting with the first Bluetooth phone, press and hold the Talk
button until the blue indicator light stays lit.
2
Press and hold the Volume up button to activate the Multi-point feature.
3
Activate the Bluetooth feature on the second Bluetooth phone and search for
the headset (see your phone’s user manual).
4
Select the headset (HM1100) from the list of devices found by the second
Bluetooth phone.
Getting started
This section explains the basic parts and functions of your Bluetooth headset.
Your headset overview
Make sure you have the following items with your headset: earhook, USB
•
cable and user manual.
The items supplied with your headset may vary depending on your region.
•
button at the same time. Depending on the battery level, the indicator light
flashes 5 times in one of the following colours:
Battery level
Indicator light colour
Above 80%
Blue
80 ~20%
Violet
Below 20%
Red
Wearing the headset
Place the headset on your ear. Depending on which ear you are going to wear
the headset, simply adjust the ear hook accordingly.
5
If requested, enter the Bluetooth PIN (0000, 4 zeros) to connect the headset
to the phone.
6
Turn the headset off and on. Once the headset has switched on, it will
automatically connect with both Bluetooth phones.
When connecting the headset to 2 Bluetooth phones, some phones may not
be able to connect as a second Bluetooth phone.
Disconnecting the headset
To disconnect the headset from your phone,
Turn off the headset.
•
Use the Bluetooth menu on your phone to remove the device from your
•
pairing list.
Reconnecting the headset
When the headset is already paired with a phone, it will attempt to automatically
reconnect each time you turn it on.
If the headset does not automatically attempt to reconnect,
Press the Talk button.
•
HM1100
www.samsungmobile.com
Printed in China
Code No. : GH68-29809S
England non TA 09/2010 Rev.1.1
2
6
10
5
9
3
7
11
4
8
12
Volume button
Talk button
Microphone
Indicator light
Earpiece
Power switch
Earhook
Charger jack
▲
Left
▲
Right
