34
7.8 Carry out the test operation
1. Disarm all security areas.
2. Remove the housing cover (see BDA of the alarm control unit Connect). The
tamper alarm is triggered.
3. Pull up the extended menu and press the
key to navigate to the submenu
"Test mode"
, then press
OK
to confirm.
4. Activate the test mode and press
OK
to confirm.
5. Carry out the test operation. Deactivation takes place in the same way.
7.9 Check the software version of the wireless operating unit
1. Pull up the extended menu and press the
key to navigate to the submenu
item "Software version".
2. Press the
ok
button. The software version is displayed.
7.10 Resetting the wireless operating unit
You can reset all local settings (e. g. set display brightness, volume, etc.) in the
central system.
1. Pull up the extended menu and press the
key to navigate to the submenu
"Reset operating unit"
, then press
OK
to confirm.
2. Enter the PIN.
All local settings are reset to factory settings.
The connection to the Alarm control unit Connect remains in place.
Activate and deactivate the test mode
Detailed information on the topic of "test mode" can be found in the system
description of the Alarm Connect security system.
Software version:
Vx.x.x.xx
Extended menu
Summary of Contents for Alarm Connect
