Gira Alarm Connect, Operating Instructions Manual

Page: 15 / 52

15
When do I trigger the panic alarm?
Trigger the panic alarm if you are in the security area and there is sudden dan-
ger (e. g. from an intruder).
When do I trigger the fire alarm?
Trigger the fire alarm if you detect a fire and can not extinguish it yourself. The
fire alarm alerts all other people in the security area.
Get yourself to safety immediately and inform the fire department.
When do I send out a service call?
Trigger the service call if you need help. The service call--according to the
configuration--gives a notification, for example, that there are people in other
security areas.
The presence alarm
Requirement: The presence alarm function has been activated and configured
in the project.
The security area user must confirm his presence within a defined time window
by entering the code (factory code: 111) on the wireless control unit. If no
confirmation is entered, the presence alarm is triggered.
If "Externally armed" is set in the security area, this function is automatically
deactivated.
1. Enter the code and confirm with the OK button.
3
Code is correct: confirmation for the time window has been made.
If no confirmation is entered within the time window, the presence alarm is
triggered and the following display appears:
Ongoing presence alarm
Deactivate alarm by
PIN entry
Manual alarms