Gira Alarm Connect, Operating Instructions Manual

Page: 25 / 52

25
1 Enable/disable Bypass
When is the "Bypass" function required?
The "Bypass" function is always required if you want to switch the security area
to "armed" despite the detector being open or the presence of an active fault
message.
The example of a wireless magnetic contact on the roof window of a bedroom
shows how you can activate Bypass and then arm the security area.
1. 1. Enter the administrator PIN and pull up the settings menu. The menu item
"Bypass" displays.
2. Press the OK button. Next, the bypassable devices and messages (open
detectors, devices with dead batteries, etc.) are displayed.
3. Use the arrow key to navigate to the device to be bypassed.
4. Press the OK button again. The following display appears:
Device with activated Bypass
Note the following:
A device with activated Bypass is ignored by the Alarm control unit Connect.
Devices with activated Bypass always present a safety risk, since the security
area can be entered at this point without triggering an alarm.
The "bypassing" of an open detector or an active fault message can only be
activated by an administrator on the wireless operating unit.
Bypass
Skylight Bedroom
Bypass deactivated
Bypass
Bypass activated
Bypass deactivated
Settings menu