Gira Alarm Connect, Operating Instructions Manual

Page: 14 / 52

14
Manual alarms
Trigger alarm
Requirement: The alarm types have been activated and configured in the
project.
The following alarms can be manually triggered using a three-digit code on the
wireless operating unit:
• Panic alarm (factory code: 110)
• Fire alarm (factory code: 112)
• Service call (factory code: 777)
Regardless of the alarm type, the following always applies:
Enter the code for the desired alarm and confirm with the
OK button. The
corresponding alarm is activated and shown in the display (example: 112 + OK
= fire alarm).
Deactivate alarm
1. Enter the PIN.
3
PIN correct: the alarm is deactivated.
2. Press the button: alarm type and source are displayed.
3. Confirm the message by entering a PIN.
Ongoing fire alarm
Deactivate alarm by
PIN entry
Manual alarms