Gira Alarm Connect, Operating Instructions Manual

Page: 11 / 52

11
Alarm forwarding
Switch the security area to armed/disarmed
Alarm and alarm forwarding
Please note the following for the topic "Alarm and alarm forwarding":
• Alarm forwarding can be activated in the project and thus transferred to other
security areas or remotely (e.g. via telephone) to outside persons or facilities.
• Without activated alarm forwarding or remote alarming, the alarm triggering
is limited to the security area in which the alarm was triggered.
Detailed information on the topic of "alarm forwarding" and "remote alarming"
can be found in the system description of the Alarm Connect security system.
PIN entry
The following always applies when entering the PIN:
After entering the 4-digit PIN, the wireless control unit generates a positive or a
negative acknowledgment tone as feedback.
3
In addition, a long acknowledgment tone can be heard = PIN is correct.
5
In addition, three short acknowledgment tones are audible = PIN is
incorrect.
Arm the security area
Keep the following in mind when arming the security area:
• Close all windows and doors.
• Check on the info page whether open detectors or faults or messages are
displayed (also see page 16 and page 17).
• Clear and acknowledge the faults, if necessary, going in the order they are
listed.
Arm/disarm