Figure 2: Radio actuator/push-button actuator potential-free
(1) Operating mode switch
(2) Button
Prog
(3) Status LED
(4) Measuring points for voltage measurement, terminals rear-mounted
3 Function
Intended use
-
Switching of lighting
-
Operation with suitable eNet radio transmitters
-
Installation in appliance box according to DIN 49073
-
Installation in surface-mounted housing or panel-mounted housing (accessories) for
suspended ceilings
Product characteristics
-
Operating mode switch for switch/push-button actuator switch-over or parameterisation via
eNet server
-
Status feedback to radio transmitter
-
Scene operation possible
-
Switchable output with
Prog
button
-
Status indicator via LED
Switching mode of operation:
-
Switch-on telegram: Device switches on
-
Switch-off telegram: Device switches off
Operating mode buttons:
-
Relay contact remains closed as long as ON or OFF telegrams are being received
-
The maximum switch-on time is 60 seconds
Can be set with eNet server:
-
Flash function
-
Run-on time
-
Switch-on delay / switch-off delay
-
Operation as NO or NC contacts
-
Switch-off warning
-
Minimum switching repeat time
-
Operation locks
-
Continuous on, Continuous off
i
If settings are changed with the eNet server, operation and signalling could vary from what
is described here.
32581212
10499450
09.05.2016
2/11
eNet
Wireless switching/momentary-contact actuator, 1-gang Mini, Wireless
switching/momentary-contact actuator, 1-gang Mini, zero-voltage