Gira 5423 00 Operating Instructions Manual Download Page 1

Wireless switching/momentary-contact actuator, 1-gang Mini

Order No. : 5423 00

Wireless switching/momentary-contact actuator, 1-gang Mini, zero-voltage

Order No. : 5424 00

Operating instructions

1 Safety instructions

Electrical devices may only be mounted and connected by electrically skilled
persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.

Danger of electric shock. Device is not suitable for disconnection from supply voltage.

Danger of electric shock on the SELV/PELV installation. Not suitable for switching
SELV/PELV voltages.

The radio communication takes place via a non-exclusively available transmission path,
and is therefore not suitable for safety-related applications, such as emergency stop and
emergency call.

These instructions are an integral part of the product, and must remain with the end
customer.

2 Device components

Figure 1: Radio actuator/push-button actuator

1/11

32581212

09.05.2016

Wireless switching/momentary-contact actuator, 1-gang Mini, Wireless
switching/momentary-contact actuator, 1-gang Mini, zero-voltage

10499450

eNet

Summary of Contents for 5423 00












Reviews: