System 3000
Blind timer and timer BT, Operating top unit BT
￭
Fit the cover with frame on the insert.
￭
Switch on mains voltage.
If the status LED (6) flashes red three times at repeated intervals, the cover was previously con-
nected to another insert. To enable operation again, either place the cover onto the correct in-
sert or press the buttons (3a) and (3b) for longer than 4 seconds.
10 Technical data
Ambient temperature
-5 ... +45 °C
Storage/transport temperature
-20 ... +70 °C
Accuracy per month
± 10 s
The time is updated with every connection to the app
Power reserve
approx. 4 h
Radio frequency
2.402 ... 2.480 GHz
Transmission capacity
max. 2.5 mW, Class 2
Transmitting range
typ. 10 m
Data according to EN 60730-1
Type of action
1.B.S.T
Degree of soiling
2
Measured surge voltage
4000 V
This device includes an integrated battery. At the end of its useful life, dispose of the
device together with the battery in accordance with the environmental regulations. Do not
throw device into household waste. Consult your local authorities about environmentally friendly
disposal. According to statutory provisions, the end consumer is obligated to return the device.
11 Parameter list
Adjustable parameters via app
Depending on the insert, the following parameters can be changed with the app.
Settings for switching/dimming and Venetian blind inserts
Parameters
Setting options,
Default setting
Explanations
Shifting the sun-
rise time
+/- 0 ... 120 minutes
Default setting: 0 minutes
Astro times represent the sunrise and sunset
times in the course of a calendar year. If you
want the switching to be executed in the early
morning at the start of twilight or only at full
brightness, this can be realised with this shift.
Shifting the sun-
set time
+/- 0 ... 120 minutes
Default setting: 0 minutes
Astro times represent the sunrise and sunset
times in the course of a calendar year. If you
want the switching to be executed in the even-
ing at the start of twilight or only at full dark-
ness, this can be realised with this shift.
Set the location
Determination of the cur-
rent position via the GPS
function of the mobile end
device.
To adapt the Astro times to the geographical
location, the GPS function of the mobile end
device must be activated. The Astro time is
calculated once a week for the localised place.
Time change
On, Off
Default setting: On
Activates automatic summer/wintertime
changeover.
7 / 12
32598122
10868257
06.07.2022
