System 3000
Blind timer and timer BT, Operating top unit BT
￭
Activate coupling mode:
2-gang cover: Press the button (4b) for longer than 4 seconds.
1-gang cover: With the load switched off, press the buttons (3a) and (3b) for longer than
4 seconds.
The blue LED flashes slowly. The coupling mode is active for one minute.
￭
Start the Gira System 3000 app and search for device to be coupled.
The "Gira Timer" cover is displayed in the app.
￭
Perform coupling.
The coupling mode is automatically exited after successful coupling. The blue LED lights
up to confirm an active connection.
A maximum of 8 mobile end devices can be coupled with a cover. When coupling the 9th
device, the least used device will be deleted.
To be able to perform position movements of the blind/shutter on a Venetian blind insert,
a reference movement is performed in the upper end position after the programming. This
reference movement should not be stopped.
6
Operation of Venetian blind and shutters
All settings and operations are also possible via app.
Moving the blind/shutter
￭
Press button (3a) or (3b) for longer than one second.
The blind/shutter moves in the desired direction to the end position or stops when the but-
ton is pressed again.
If a ventilation position has been saved, the blind stops in the ventilation position when
moving down (see Saving the ventilation position).
When executing via a Bluetooth wall transmitter, the blind/shutter is activated as long as
pressure is applied to the button.
Adjusting the slats
￭
Press the button (3a) or (3b) for less than one second.
Saving blind/shutter running time
To perform positioning movements, the blind/shutter running time has to be saved beforehand.
To save blind/shutter running time, the Venetian blind must be moved to the upper end position
and the status LED (6) switch off automatically.
￭
From the top end position, press the button (3b) for longer than second.
The blind/shutter moves in the lower end position direction.
￭
Press and hold down the buttons (3a) and (3b).
The blind/shutter remains stopped, but continues to move after 4 seconds.
￭
As soon as the blind/shutter has reached the lower end position, release the buttons and
press button (3b) within the next 4 seconds.
The running time is saved. The blind/shutter moves back to the upper end position.
Saving the ventilation position
To save the ventilation position, the Venetian blind must be moved to the upper end position
and the status LED (6) switch off automatically.
￭
From the top end position, press the button (3b) for longer than second.
The blind/shutter moves in the lower end position direction.
￭
Press and hold down the buttons (3a) and (3b).
The blind/shutter remains stopped, but continues to move after 4 seconds.
4 / 12
32598122
10868257
06.07.2022
