background image

- 1 -

AS-221T

Staircase lighting timer 

with switch-off indication

Staircase lighting timer (time switch) is used to keep the lighting 

on in corridors, staircases or other places for a certain period of 

time, after which the lighting will be switched off automatically.

When activated by momentary (bell) switch the staircase lighting 

timer keeps the lighting switched on for the time set by the po-

tentiometer (from 0.5 to 10 minutes), after which the brightness 

of the lighting system is reduced by half for about 30 seconds. 

Only after this time will the lighting be completely switched off 

(sudden darkness is avoided, there is time for safe access to the 

switch). During the reduced brightness the subsequent signal 

from the switch will switch the lighting back on to full brightness.

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste!  

According to the 

Law on Waste, electro coming from households free of charge and can give any amo-

unt to up to that end point of collec� on, as well as to store the occasion of the pur-

chase of new equipment (in accordance with the principle of old-for-new, regardless 

of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Summary of Contents for AS-221T







Reviews: