STAIRCASE LIGHTING TIMERY ASH-01
INSTRUCTION MANUAL
ZAMEL
sp. z o.o.
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamelcet.com
, e-mail: [email protected]
VER. 002_01.12.2008
FEATURES
DESCRIPTION
APPEARANCE
ی Staircase lighting control,
ی operating time adjustment from 10
sec to 10 min,
ی cooperation with monostable push-
buttons equipped with illumination
lamps,
ی cooperation with 3-wire or 4-wire in-
stallation,
ی cable connection 0,5 m long,
ی hermetic casing (IP 65),
ی voltage relay output max 16 A capa-
city.
The staircase lighting time delay
switch ASH-01 is used to control lighting
devices on staircases and corridors. After
releasing the system it switches on the
lighting for the preset time by the user.
After that it switches off automatically.
The operating time can be adjusted from
10 sec to 10 min by means of a potentio-
meter. The staircase lighting time delay
switch ASH-01 can be used as standard
time delay relay. The hermetic casing
(IP65) secures the device functioning in
unfavorable weather conditions.
The device is designed
for single-phase instal-
lation and must be in-
stalled in accordance
with standards valid in
a particular country. The
device should be con-
nected according to the details included
in this operating manual. Installation,
connection and control should be car-
ried out by a qualified electrician staff,
who act in accordance with the servi-
ce manual and the device functions.
Disassembling of the device is equal
with a loss of guarantee and can cause
electric shock. Before installation make
sure the connection cables are not un-
der voltage. The cruciform head screw-
driver 3,5 mm should be used to instal
the device. Improper transport, stora-
ge, and use of the device influence its
wrong functioning. It is not advisable to
instal the device in the following cases:
if any device part is missing or the de-
vice is damaged or deformed. In case
of improper functioning of the device
contact the producer.
CAUTION
TECHNICAL PARAMETERS
ASH-01
Power supply cables: L (black), N (blue)
Input rated voltage: 230 V~
Input voltage tolerance: from -15 to +10 %
Nominal frequency: 50 / 60 Hz
Rated power consumption: 48 mA
Release / output (load) cables: brown, grey (connected inside)
Time adjustment range: from 10 sec to 10 min
Time accuracy adjustment: ±10 %
Time repeatability adjustment: ±5 %
Time adjustment: rotational potentiometer
Output relay parameters: 16 A / 250 V AC1 4000 VA
Number of switch cables: 4
Section of connecting cables: 4 x 1,50 mm
2
Connecting cable length: 0,5 m
Ambient temperature range: from -20 to +45
o
C
Operating position: vertical, pointed down
Mounting: 2x stretcher 5x(3x30)
Protection degree: IP65 (PN-EN 60529)
Protective class: II
Overvoltage category: II
Pollution degree: 2
Rated impulse withstand voltage: 1 kV (PN-EN 61000-4-5)
Dimensions: 69 x 56 x 27 mm
Weight: 101 g
Reference standards: PN-EN 60669-1
PN-EN 60669-2-1
PN-EN 61000-4-2,3,4,5,6,11
black
brown
grey
blue
Power supply cable (N)
Power supply cable (L)
Time adjustment
Release / output (load)
cables
