Gira S1 device website
Order No. 2089 00
Page 64
14. Gira S1 device website
All settings and parameters can be seen at a glance on the Gira S1's device website. You can also
change the network settings here, save a log file, which you can pass on to the Gira hotline in the
event of a fault or servicing, trigger a restart and a factory reset as well as perform a firmware update.
The device website is displayed in the Internet browser.
Figure 26: Gira S1 device website
Calling up the device website
If you know the IP address of the Gira S1, you can call up the device website by entering the IP address
in the address line of a web browser (Chrome, Firefox...). To do this, the PC must be on the same
network as the Gira S1.
If you do not know the IP address, open Windows Explorer and click “Network”. The Gira S1 is dis
-
played in the “Other Devices” area. Double-click the Gira S1 symbol to open a device website.
Entering a password
On the website that opens, enter the registration ID of the Gira S1 as the password. You can find the
registration ID on a sticker on the device.
Access data for the diagnostic page
To open the diagnostics page of the Gira S1, please use the following access data:
User name: device
Password: GPA password (located on a sticker on the device)
