20
We take pride in designing our equipment as reliable as possible. Occasionally though a problem does arise. Please make
an attempt to follow the section on troubleshooting before calling to order parts. Writing down the information derived
from using these test procedures will assist us in providing quicker and more accurate assistance. Please have the equip
-
ment model number available before you contact us. Equipment Model Number: GP-PL-70.
Our office hours are 8am-6pm EST/EDT, Monday through Thursday and 8am-5pm EST/EDT on Friday. We honor most
major national holidays and our facility will be closed every Thanksgiving, Christmas and New Years day.
As standard business practice, we expect all orders to be faxed and then followed up by an original copy sent by mail.
Our fax number is (317) 543-3289 and is always ready to receive your order anytime of the day or night.
If the part is covered (see terms of the warranty agreement) then prior to sending the part back, contact us for a return
authorization number. Under the terms of the warranty, you must return the broken part to our factory
prepaid
, then we
will supply back to you a fully warranted replacement part at no additional cost.
Supplies, Media & Tips
The media that we offer has a typical chemical analysis of 99.55% Aluminum Oxide and is inert to the skin. The crystal
-
lography shows crystallized alpha alumina and this material has an amphoteric chemical nature. It is guaranteed to be
the finest product of its kind sold anywhere. Each particle is rough, blocky and manufactured in a way that produces very
sharp edges. It is this physical structure that provide such improved performance when the equipment is used properly
during microdermabrasion. Additional supplies are available from your dealer.
Aluminum Oxide Crystals
GP-IM-CAP-90 Fast Cut
GP-IM-CAP-100 Aggressive
GP-IM-CAP-120 Normal
• Completely sealed & fully disposable
• Pre-filled with approximately 1.5lbs. of Alumi-
num Oxide crystals
(enough for 7-9 procedures,
depending on individual usage)
• Has a compartment built in the bottom half of
the capsule for the used abrading media to go.
When the crystal supply is exhausted, simply
unplug the capsule from the machine and throw
it away.
T E C H N I C A L S E R V I C E & R E P L A C E M E N T P A R T S
Disposable Tubing
GP-RT5
• Twin line tubing
• Non-autoclavable
Reusable Nozzle
GP-AHP-1B
• For directing abrading media
• Can be autoclaved and reused
• Color of nozzle: blue
Crystal-Free Tips
GP-DMT-0 Massage
GP-DCFT-1 Coarse
GP-DCFT-3 Medium
GP-DCFT-6 Fine
GP-DCFT-HP Handpiece
GP-DCFT-T Tubing
Filter Canister
GP-IM-CAN-1
• Clear plastic canister housing for
the polypropylene filter
Gio Peel
Filter
GP-IM-FIL-1
• Polypropylene filter
• Only filter for the Gio Peel that
needs to be cleaned and replaced
Vacuum Post O-Rings
GP-IM-ORG-1
• Replacement o-rings for the
vacuum post
(vacuum post connects
Crystal Capsule to the Gio Peel
)
• Wears out over time and needs to
be replaced
• 10 per package
Filter Canister O-Ring
GP-IM-SEA-1
• Used to create a vacuum seal
between the filter canister cover
and the housing
• 6 per package
Crystal Capsules
Nozzles & Tubing
Filter Parts
O-Rings