![background image](http://html1.mh-extra.com/html/gima/utc2/utc2_instruction-manual_2228106053.webp)
MA531_EN
ALL II
Guidance and manufacturer’s declaration – electromagnetic immunity
Power
frequency
(50/60 Hz) magnetic
field
IEC 61000-4-8
3 A/m
3 A/m
Power frequency magnetic fields should be at levels characteristic of a typical location in a typical com-
mercial or hospital environment
NOTE
U
T
is the a.c. mains voltage prior to application of the test level
Guidance and manufacturer’s declaration – electromagnetic immunity
The
UTC2
is intended for use in the electromagnetic environment specified below. The customer or the user of the
UTC2
should assure that is used
in such an environment
Immunity test
IEC60601
test level
Compliance
level
Electromagnetic environment - guidance
Conducted RF
IEC61000-4-6
Radiated RF
IEC61000-4-3
3 Veff
150 kHz to 80 MHz
3 V/m
80 MHz to 2,5 GHz
3 V
3 V/m
Portable and mobile RF communications equipment should be used no closer to any part of the
UTC2
,
including cables, than the recommended separation distance calculated from the equation applicable to the
frequency of the transmitter.
Recommended separation distance
d=
1,2√
P
d=
1,2√
P
from 80 MHz to 800 MHz
d=
2,3√
P
from800 MHz to 2,5 GHz
where
P
is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer and
d
is the recommended separation distance in meters (m).
Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey,
a
should be less
than the compliance level in each frequency range.
b
Interference may occur in the vicinity of equipment marked with the following symbol:
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and
people.
a
Le intensità di campo per trasmettitori fissi, come le stazioni base per radiotelefoni (cellulField strength from fixed transmitters, such as base stations for
radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoreti-
cally with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If
the measured field strength in the location in which the
UTC2
is used exceeds the applicable RF compliance level above, the
UTC2
should be observed
to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the
UTC2
.
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
Recommended separation distances between portable and mobile RF communications equipment and the UTC2
The
UTC2
is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the
UTC2
can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equip-
ment (transmitters) and the
UTC2
as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d
= 1,2√
P
80 MHz to 800 MHz
d
= 1,2√
P
800 MHz to 2,5 GHz
d
= 2,3√
P
0,01
0,12
0,12
0,23
Summary of Contents for UTC2
