![background image](http://html1.mh-extra.com/html/gima/utc2/utc2_instruction-manual_2228106051.webp)
English
EN
MA531_EN
EN 49
MAINTENANCE
Preventive Maintenance
BEFORE CARRYING OUT ANY TYPE OF MAINTENANCE, DISCONNECT THE ELECTRICAL CONNECTIONS.
The preventive maintenance consists in:
-the control before any using of the equipment and the accessories to examine the integrity of all cables, the insulation, the
covers etc. designed to avoid the access to the parts under tension.
-the periodic cleaning of the equipment to keep the unit in good conditions of working.
-the periodical cleaning of the accessories.
Unit Cleaning
Clean the external container and command panels with a moist cloth: do not use abrasive products or solvents. Specifi-
cally to the command and output panel do not use ethyl alcohol or other solvents.
Do not immerse the unit in liquids. In case of penetration of liquids turn to the qualified personnel.
Cleaning of the Transducers
Clean the transducers with a soft detergents. Remove completely all the residuals of GEL from it.
Cleaning of the supplied Electrodes
Clean the electrodes with a moist cloth: do not use abrasive products or solvents. Do not use detergent. In case of using
of detergents clean it with cold water, to eliminate every detergent’s trace.
To avoid bacterial contamination or virus, the electrodes has to be used for a single patient.
For the cleaning we advise to use only cold water. In case of cleaning with detergents, rinse with care before the using to
avoid every detergent’s trace. Do not wash it in the washing machine.
.
Cleaning of the supplied Velcro Bands
For the cleaning of the Velcro bands do not use hot water, in case of detergents, reins it carefully.
NOTE: The equipment, periodically (once a year), should be controlled by the qualified personnel to verify the electrical
security values:
-a measure of dispersion of currents
-a measure of the resistance between the earth terminal and every conductive parts
- verification calibration unit and transducer/s.
Corrective Maintenance
If the equipment doesn’t work well we advise to control that there is not a fault in the commands.
In case that the unit is submitted to mechanical and external solicitations, for example after a heavy fall, or if the equip-
ment is submitted to liquids, or to a strong overheating (for example direct light of the sun, fire), or if some parts of the
covering are broken, or if some connectors or cables are consumed, the equipment and the accessories should be con-
trolled by the qualified personnel.
Summary of Contents for UTC2
