Gima UTC2, Instruction Manual

Page: 35 / 56

English
EN
MA531_EN
EN 33
PROTOCOLS
From the HOME screen by selecting “Protocols” through the next popup you can choose to work with typical
protocols:
Ultrasound (US)
,
Currents (ET)
, or both (
Combi
) protocols. Select and confirm one of the three
icons, and then the screen showing the list of protocols in the drive memory is displayed. The directory its
composed from more pages. In order to slide all the programs inserted in the memory of the unit, to rotate
the grip handle or to slide directly with the finger on the display device. A selected protocol is indicated by
the sign of blunts.
V
AAAAA FFFFFFF
BBBBBBB GGGGGG
CCCCCCCC HHHHHH
DDDDDDDD KKKKKKK
EEEEEEEEEE JJJJJJJJJ
In order to choose the protocol to press the grip handle or to touch the written one with the finger. Chosen the wished
protocol the equipment is arranged in the shielded one of job “Working Screen”, to this point, to press the key START for
giving beginning to the treatment (sees chapter TREATMENT).
It should be noted that the next “Working Screen” resulting from a protocol contains the editable parameters, specific to
the treatment to be performed.
IMPORTANT: Every information relative to the protocols is given only for an informative aim, it is not conceived to sub-
stitute the treatment’s modality that has to be indicated from the sanitary and qualified personnel. No responsibility of
the equipment is assumed from the supplier still less the protocols, for consequences deriving from the use of the same,
without a good verification of fitness from the sanitary personnel .
In “Current” mode, you can select any protocol for each channel (independent channels) or you can choose to use the
channels in combination (each channel repeats the first protocol selected). In “Combi” mode, you can select the protocols
for the ET1 channel and the associated ET2-US channel pair. (Refer to chapter SETTINGS “CanaIi Dependency”)