![background image](http://html1.mh-extra.com/html/gima/utc2/utc2_instruction-manual_2228106030.webp)
MA531_EN
EN 28
UTC2
Equipment Description
1 POWER SUPPLY MODULE
a
Mains voltage connector
b
Power On-Off switch
c
Fuses holder
2 USB 2.0 PORT
d
USB 2.0 Standard-B
e
USB 2.0 Standard-A
3 VENTILATION GRIDS
4 SECURITY LOCK
5 OUTPUT US PANNEL
f
OUTPUT US connector
6 PANNELLO DI USCITA PER ELETTROTERAPIA
g
Connettore OUT per accessorio ET
1 POWER SUPPLY MODULE
This module is provided with mains voltage connector and line fuses.
WARNING:
before switch on the unit, operator has to verify that requested mains voltage corresponds to the voltage
available from the electrical net. (see chapter INSTALLATION).
a)
Mains voltage commector
is the connection point of mains voltage feeding to the unit.
b) The
power on-off switch
is the control to switch on the equipment. In “I” position the equipment is on and the interrupter
is lit. In “O” position the equipment is turned off and the interrupter is not illuminated.
c)
Fuses holder
in this part there is power fuses.
2 USB PORT
For software updating on the rear unit are present two USB 2.0 ports.
d)
Standard-A
e)
Standard-B
3 VENTILATION GRID
The ventilating grilles keep the internal temperature condition compatible with the equipment’s characteristics so it is im-
portant that the same are not obstructed
4 SECURITY LOCK
In order to avoid I remove it non-authorized of the units is possible to connect the same ones to a compatible security
system.
5 OUPTUT US PANNEL
f)
OUTPUT US connector
for transducer.
6 OUPTUT ET PANNEL
f)
OUTPUT connector
for electrotherapy cable.
Summary of Contents for UTC2
