33
4.2 Interface introduction
Figure 3. Measurement interface
4.3 SpO2 probe installation
Inserting the lemo probe into the lemo jack of the device (The probe is limited to the one that is provided
by our company; and can’t be replaced with the similar one by other manufacturers).
4.4 Connection of data line
Please connect the data line to device, the other end into computer.
4.5 Structure, accessories and software description
A. Structure: main unit, Oximeter probe, A power supply line and A data line.
B. Accessories: one User Manual, one power supply line, one data line, one Oximeter probe.
Optional: A Other Oximeter probe
C. Software description
Release version: 2.0
5 OPERATING
5.1 Measurement
Put the finger into the probe as Figure 4.
Figure 4. Sketch map for finger placement
(The appearance of actual probe may be different with the one shown as Figure 4, please refer to the
actual probe.)
ENGLISH
