37
A. Set the high/low limit of alarm
In alarm setting menu, you can set the high/low limit of alarm. Move the choice bar to the menu item
that you want to set, and press left/right button to set value, then press menu button for affirming.
Note: If the alarm function is on, the device will provide alarm sound when the measure value is
beyond the limit.
B. move the choice bar to “Set Alarm” item, then press menu button to enter the set alarm menu of
Figure 13.
Figure 13. set alarm menu
a. SpO2 Alarm: move the choice bar to the “SpO
2
Alarm” item, then press left/ right button to set SpO
2
Alarm.
b. PR Alarm: move the choice bar to the “PR Alarm” item, then press left/ right button to set PR Alarm.
c. Alarm Volume: move the choice bar to the “Alarm Volume” item, then press left/ right button to set
the volume (three levels).
d. Alarm Pause(sec): move the choice bar to the “Alarm Pause(sec)” item, then press left/right to set
the alarm pause time. (60/120/600/INF, INF mean display at all times).
e. Set Password: move the choice bar to the “Set Password” item, then press menu button to enter the
Password interface of Figure 14 to set a new password.
Figure 14. New Password
interface
Note: Password can be 1~4 digits. The new password cannot be the same as the old password.
f. Alarm Password: move the choice bar to the “Alarm Password” item, then press left/right button to
set Alarm Password.
Note: When on, you need a password to enter the alarm menu, but you don’t need a password
to enter the set alarm menu. When off, you don’t need a password to enter the alarm menu, but
you need a password to enter the set alarm menu.
ENGLISH
