Operative Manual
MO082-IT
22/04/13
Rev.0
Pag. 9 di 12
6.6
Routine maintenance
n
Period
Job
1
Once a year
Inspect all the lamp joints and make sure they are not hard to move. If Product does not
maintain the position or is hard in movements, contact the service center.
2
Once a year
Make sure the retention screws are tightened properly.
If these are not properly fastened,
adequately tighten.
3
Once a year
Check the condition of the Product paint. Make sure there are no paint pieces that could
fall on the operating field.
7.
Technical data
Technical data
GIMANORD
Illumination Ec at a distance of 50cm [Lux] ± 10%
550
Data on electrical connection
Primary alternating voltage [Volt ac]
220-240
Frequency [Hz]
50
Absorbed power [VA]
33
Light source
N°1 Lamp. 22W-230V G10q
Light source duration [h]
(this datum can vary according to voltage peaks and the
frequency of use)
5.000
General data
Color
RAL 9003
Directive
93/42/EEC (included 2007/47/EC)
Standard
EN 60601-1and EN 60601-2-41
Electrical safety class
Class I
