![background image](http://html1.mh-extra.com/html/gima/abpm-pulse-rate-monitor-with-bluetooth/abpm-pulse-rate-monitor-with-bluetooth_user-manual_2227784011.webp)
11
2.4 Connect Sensor
Note
For information on correct connection of NIBP cuff,
refer to Figure 3
Connect the sensor between the monitor and the measure part of the patient.
Chapter 3
FUNCTION INTERFACE
• Main interface
• System menu
3.1 Main Interface
Press to power on the instrument. The indicator will circularly flash
once, which show the boot-strap is success, then end pressing, the system
will enter into the main interface.
In common user mode, if there is no key-press operation during the time
which system sets, the device will turn off LCD and enter into standby
mode, if there is no any operation in the standby mode, the device
will automatically turn off; the “RUN” indicator flashes once every 3 seconds
to prompt the device in working state.
When the power is low, the battery progress bar is empty, at the same
time the alarm sound occurs, and the red indicator flashes in fixed time.
In the Main Interface:
Alarm-switch status is displayed in the left top of the screen, button
can switch the alarm status shortly.
User bar displays the current patient type (adult, pediatric, neonatal),
and the amount of the common user’s data record.
Current date and time is displayed in the middle top of the screen,
the precision of the time is second.
Figure 3
Connection method
CUFF
OK
OK