10
ENGLISH
Recommended Operating Environment:
WARNINGS AND SAFETY INFORMATION:
Check the correct operation of the device before use. Do not use the device if there are visible
signs of damage. Do not use the device in fi re or explosive risk area (e.g. oxygen saturated
or an aesthetic environments). Do not modify the device. Use only original parts, spare parts,
accessories and power sources.The device must not be placed near strong Magnetic fi elds,
e.g. MRI units.
ELECTROMAGNETIC DISTURBANCES:
Warning. Use of accessories, transducers and cables other than those specifi ed or provided
by the manufacturer of this equipment could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and result in improper operation.
CAUTION!
Indicates potential hazardous situations. Ignoring the corresponding instructions may lead to
dangerous situations of mild to serious extent.
GIMA WARRANTY CONDITIONS
Congratulations for purchasing a GIMA product. This product meets high qualitative standards
both as regards the material and the production. The warranty is valid for 12 months from the
date of supply of GIMA. During the period of validity of the warranty, GIMA will repair and/
or replace free of charge all the defected parts due to production reasons. Labor costs and
personnel traveling expenses and packaging not included. All components subject to wear are
not included in the warranty. The repair or replacement performed during the warranty period
shall not extend the warranty. The warranty is void in the following cases: repairs performed
by unauthorized personnel or with non-original spare parts, defects caused by negligence
or incorrect use.GIMA cannot be held responsible for malfunctioning on electronic devices
or software due to outside agents such as: voltage changes, electro-magnetic fi elds, radio
interferences, etc. The warranty is void if the above regulations are not observed and if the
serial code (if available) has been removed, cancelled or changed. The defected products
must be returned only to the dealer the product was purchased from. Products sent to GIMA
will be rejected.
Operation
Temperature
Humidity
Air pressure
10°C to 40°C
30% to 75%
700hPa to 1060hPa
Altitude
0-13123 feet (0-4.000 meters)
Storage and Transport
Temperature
Humidity
Air pressure
-20 °C to 60 °C
10% to 90%
(Without Condensation)
500hPa to 1060hPa