12
11 - maIntenance
Routine maintenance will help keep your pipette in
good condition, ensuring a continued high level of
performance.
Maintenance is limited to:
Cleaning or decontamination (
see Chapter 12 - Cleaning
and Decontamination
)
Replacing spare parts
Greasing the piston assembly.
PIPeTmaN P2G and P10G should not be disassembled
,
so you may only replace the push-button, tip-ejector,
dual position tip-ejector and its adapter. With these
pipettes if the tip-holder is damaged, the piston may
also be damaged.
After replacing any parts you
should
verify
the performance of your pipette following the
verification procedure available on the Gilson
website (www.gilson.com). If the pipette needs
to be readjusted, please contact your local Gilson
authorized Service Center.
changing the tip-ejector
To remove
Push the ejection
button.
Push laterally the
tip-ejector.
Slide and remove
the tip-ejector.
To refit
Push the ejection
button.
Slide the tip-ejector along the tip-holder.
Clip the tip-ejector on the body of the pipette.
Summary of Contents for Pipetman P1000G
Page 50: ...NOTES...
