background image

2

QUICK GUIDE 

|

 

PIPETMAN® G

Introduction

 

PIPETMAN® G is a fully adjustable air-displacement, 

pipette that is used with disposable tips. 
Eight single channel models cover a volume range from 

0.2 µL to 10 mL. 
Eight multichannel models cover a volume range from  

1 µL to 300 µL. 

NOTICE

PIPETMAN G is identified by a visual blue ring.

PIPETMAN G pistons need to be lubricated.

Parts Checklist

Single models

 

PIPETMAN G

 

PIPETMAN G Quick Guide

 

Safety bag

 

Dual-position adapter (for P2G and P10G models 

only, refer to

 Fitting the Tips 

on page 6)

 

Certificate of Conformity (including barcode 

sticker)

Multichannel models

 

PIPETMAN G

 

PIPETMAN G Quick Guide

 

Safety bag

 

Ejector spacers for D10 tips (for Px10G models 

only, refer to 

Ejector Spacers for PIPETMAN G 

Multichannel 10 uL

 on page 6)

 

Certificate of Conformity (including barcode 

sticker)

GLP Compliant

The 

serial number

 is engraved 

on the body of the pipette. It 
provides unique identification 
of your pipette and the date 
of manufacture. For more 
details, refer to 

PIPETMAN G 

User’s Guide LT801122.
Ex: AA10369

The 

barcode 

on the box and 

the Certificate of Conformity 
provide traceability of your 
pipette.

Serial number

Figure 1

Serial number location

Summary of Contents for PIPETMAN G













Reviews: