3
Distriman is equipped with a direct reading volu-
meter that allows precise and continuous volume
setting. The aliquots are dispensed by pressing
the push-button the required number of times (you
may also change the volume between aliquots).
A small red flag warns you when you are near to
dispensing the final aliquot.
Because your Distriman is permanently calibrated
when manufactured, there is no need for re-
adjustment. It is virtually maintenance free.
However, a few spare parts have been made
available in case they are damaged as the result
of extensive use.
2 - OPERATION
You should perform the following sequence of steps.
1 - Select a DistriTip of suitable capacity.
2 - Fit the DistriTip to the Distriman.
3 - Select the volume range on the Distriman.
4 - Set the aliquot volume.
5 - Lock in the selected volume.
6 - Fill the DistriTip.
7 - Dispense the aliquots.
8 - Eject the DistriTips.
Select the DistriTip
Besides the standard DistriTip, individually wrapped
sterilized versions are available. DistriTips are
available in the sizes specified below.
DistriTip Micro
125 µL
1 µL to 12.5 µL
DistriTip Mini
1250 µL
10 µL to 125 µL
DistriTip Maxi
12.5 mL
100 µL to 1250 µL
