Gilras GRU-5000 A, Operation Manual

Page: 37 / 68

Chapter 4 Operation
- 28 -
Figure 4.21 IOL Interface (Constant A/ACD Input Dialogue Box - Editing Status)
Select the data to be amended, click the data box to move the cursor in and input the required
data with the keypad on the left. Click EDIT key again, the system will save the input parameter
and the EDIT key turns to blue. Click OK to exit.
Click CAL key to make calculation after all parameters are input. The calculating result will display
on the screen. The operator can select to print out or save the result according to the practical
situation.
4.3.3 DATA BASE
Click DATA BASE key in the MENU Interface to enter the data base and check patient
information.
In each measuring interfaces, if data are saved after measurement, the patient's information will
be saved in the data base.
Figure 4.22 DATA BASE Interface