Gilras GRU-5000 A, Operation Manual

Page: 15 / 68

Chapter 3 Installation
- 6 -
Note: Don't pull the probe cable strongly while unplugging the probe.
(a) Connection of Probe (b) Disconnection of Probe
Figure 3.4 Connection/Disconnection of Probe
3.3.3. Connection of Power Supply
Figure 3.5 Connection of External Interface
1)
Plug the DC Power Output Plug of the Power Adaptor in the Power Input Socket on the rear
panel of the instrument;
2) Connect one end of the Power Cable with the Power Adaptor, and the other end to the wall
outlet, as shown in Figure 3.5.
3.3.4. Disconnection of Power Supply
1 ） Turn off the Power Switch on the front panel;
2
）
Disconnect the main power plug of the Power Adaptor and the wall outlet.
Note: Take care of safety while connecting or disconnecting the power supply.