Gilras GRU-5000 A, Operation Manual

Page: 28 / 68

Chapter 4 Operation
- 19 -
Figure 4.12 DATA BASE Interface
This interface lists all the saved patient information in tabular format. The contents displayed
include patient name, patient ID, age, sex, OS/OD, measuring type (A Biometer) and storage
time. Patient information can be checked. Click the line of corresponding patient information, the
blue bar appears, then click OK to enter the Measuring Data Display Interface of the save
information and observe the measuring result. (Please refer to §4.3.3 DATA BASE and §4.3.4
Display of Saved Information)
CLEAR key is used to clear all the patient information, clicking this key will call out a dialog box
to confirm the request of clear or not. Choose YES to clear all information which can not be
restored; choose NO to exit directly. Click DELETE key to delete the selected information only.
All deletions are not recoverable, please operate cautiously. Click EXIT key to exit.
4.3 Operation
4.3.1 Positioning
Place the instrument beside the patient. The distance between should enable the probe to contact
the patient's eye easily. The instrument should face the operator and the foot switch should be
placed appropriately for operation. Please ensure the instrument is located safely and will not
cause falling and hurting people by accidental operation. Switch on the instrument after
completing the above steps.
4.3.2 A Biometer Unit
4.3.2.1 Input Patient Information
In the ASCAN Interface, click the Patient Information Display Area at the bottom of the screen to
enter the PATIENT Interface, (or click MENU key to enter the MENU Interface, then click
PATIENT key to enter the PATIENT Interface) and input patient's information accordingly. The
default patient name is empty, patient ID is: -----, age: -------, and sex: MALE. Please update the
patient information in time to prevent any error.