GILMAN Gemini GBM20P, Manual

Page: 6 / 28

6
• Select your menu, color, loaf size.
• Set the delay time by pressing TIME button. The delay time should include the
operation time of chosen menu. Suppose it is 8:30PM now and you want the bread
is ready to serve at 7:00Am of next day, so the delay time should be 10 hours and
30 minutes. Press TIME button continuously until 10:30 appear on the display. The
increment of each press is 10 minutes. Press and hold the TIME button for 0.5s, the
time will be advanced rapidly at a rate of 60min/s. The maximum delay time is 13
hours.
• Press the STOP/START button to activate this delay program. You can see the dot
flashes and LCD will count down to show the remaining time.
Note:
• This button is not applicable for the programs QUICK, JAM, ULTRA FAST and BAKE.
• For the time delayed baking, do not use any easily perishable ingredients such as
eggs, fresh milk, fruits, onions, etc.
Pause
KEEP WARM
Light lamp
MEMORY
After procedure starts up, you can touch PAUSE button to interrupt at any time, the
operation will be paused but the setting will be memorized, the outstanding time will be
flashed on the LCD. Touch PAUSE button again, the program will continue.
Note: in the lock mode, you must cancel lock before operating the PAUSE key.
Bread can be automatically kept warm for 1 hour after baking. During keeping warm,
if you would like to take the bread out, switch the program off by touching the START/
STOP button, for the programs without keep-warm function including QUICK, JAM,
DOUGH and ULTRA FAST, after baking,
Touch the button once, the lighting lamp will be illuminated to expediently view the
operation. After 1 minute, don’t need touch the button, the lamp will be extinguished
automatically.
If the power supply has been interrupted during the course of making bread, the proc-
ess of making bread will be continued automatically within 10 minutes, even without
touching “START/STOP” button.
If the interruption time exceeds 10 minutes, the memory cannot be kept, you must
discard the ingredients in the bread pan and add the ingredients into bread pan again,
and the bread maker must be restarted. But if the dough has not entered the rising
phase when the power supply breaks off, you can touch the “START/STOP” directly to
continue the program from the beginning.