GILES FSH-3.5, Operation & Service Manual

Page: 31 / 68

21
Model: FSH-3.5 & FSH-4 Overview
3-01. Control Panel
Item Description Function
1 Light Switch Used to turn the hood light on and off.
2*
PUSH to START
Button
After the Power Switch is in the “ON” position, push and
hold down “PUSH to START” Button for 5 seconds. (Used
only in units with Inter-Locking Start (ILS) system.
3 Power Switch
The Power Switch is a two-position Switch. Move the switch
upward to the “ON” position for operation.
4
“CHECK” LED Indicator
(Right & Left EAC’s)
The “Check” Indicator Light will turn on when the EAC
becomes shorted. (EAC needs cleaning or repair).
5
“WASH” LED Indicator
(Right & Left EAC’s)
The “Wash“ Indicator Light will come on when the EAC
becomes excessively dirty.
DO NOT use this light as a signal
for routine cleaning of the EAC. Failure to clean the EAC daily
will significantly decrease the life of the charcoal filter and
possibly damage the EAC power supply. Clean the EAC daily
for best performance.
6
“ON” LED Indicator
(Right & Left EAC’s)
The “ON” Indicator Light will turn on when the Electronic Air
Cleaner (EAC) power supply is on.
7
Charcoal or Baffle Filter
Clogged Light
The “Charcoal or Baffle Filer Clogged” Light will turn on when
the Grease Baffle Filter, Pre-filter, or Charcoal Filter is
dirty/clogged.
8
Charcoal or Baffle Filter
Missing Light
The “Charcoal or Baffle Filter Missing Light” illuminates when
either Charcoal, Pre-Filter, or Baffle filter is missing or incor-
rectly installed.
9 Appliance Powered Light
The “Appliance Powered Light”will turn on to signify appliance
power when all filters are installed correctly and none are
clogged.
10 Hood Powered Light
The “Hood Powered Light” will turn on when both of the filter
doors are closed properly and power switch is “on.” If
equipped, ILS button must also be depressed.
* Inter-Locking Start (ILS) Only