1
Model: FSH-3.5
&
FSH-4
Introduction
Congratulations on the purchase of a new FSH-3.5 or FSH-4 Giles Ventless Hood System manufactured by
Giles Enterprises, Inc., Montgomery, Alabama (USA), hereafter referred to as "Giles". These two models
are available in either ceiling mounted or free-stand mounted versions. The stand mounted version is
available in a 72” or 78” height (measured from the floor to the bottom edge on the hood skirt).
Proper care and maintenance of this unit will ensure years of trouble-free service and to help protect your
investment in this equipment, we recommend taking a few moments to familiarize yourself with the
installation, cleaning, and maintenance procedures described in this manual. We urge you to read these
instructions before installing or using this hood. Adherence to these recommended procedures will
minimize potential for costly downtime and equipment repairs. Please retain this manual for future
reference.
Control Panel
• Two LED light clusters indicate the status of the left and right EAC filters.
• “Appliance Powered” light indicates that power is being supplied to the interlocked appliance(s) under
the hood.
• “Filter Missing” light indicates that one (or more) Baffle filter, Pre-filter, and/or Charcoal filter is missing
or installed improperly.
• “Filter Clogged” light indicates that the Baffle filters, Pre-filters, and/or Charcoal filters are possibly
clogged and require attention to ensure proper hood performance.
Filters
• Baffle Filters - capture large grease particles in the air stream.
• Pre-Filters - capture the smaller grease particles.
• Electronic Air Cleaners (EAC) - capture smoke & fine particle air contaminates.
• Charcoal Filters - help eliminate cooking odors.
1.
Introduction
1-1.
Construction
1-2. Standard Features
The Ventless Hood System exterior is constructed of stainless steel.
1-3. Optional Features
Inter-Locking Start System (ILS)
• Inter-Locking Start System (ILS) - Should there be a power interruption to the the hood, this system will
not allow the Hood and the Appliance(s) below it to restart without the attendance of an operator. This
system is required by code in some cities and/or states. Please consult with your local code officials to
see if this option is required.
Floor Stand Mount
• 72” or 78” high stand mounts are available instead of the standard ceiling hung mount (*height
measured from floor to bottom edge of skirt).
Summary of Contents for FSH-3.5
