Gilera RCR 50, Manual

Page: 41 / 68

03_22
03_23
03_24
Front and rear disc brake
The disc brakes, comparing with drum brakes, have the following specifications and
advantages:
- The heat evacuation from friction surfaces is very efficient, since discs turn with direct
air contact. This is the reason why they always have a steady braking capacity, even
when the brake is used repeatedly at high speed.
- No component of the disc brake is exposed to deformation due to elevate tempera-
tures.
- The pad change is simple and does not require difficult procedures.
- As the discs are wet on rainy days, the recovery of the braking power is excellent
and efficient braking of the front and rear brakes is ensured. This is thanks to the pads
high pressure specifications.
Front and rear disc brake (03_22, 03_23, 03_24)
Brake disc
The disc surface must be completely free of oil. Use alcohol and a soft cloth for clean-
ing.
Brake pads:
If the brake squeals, may be due to the following causes:
- Incorrect brake functioning
- Brake pad wearing. Excessive wear make the brakes squeal.
In both cases, contact an Authorised Service Centre Piaggio-Gilera .
Hoses and Joints:
Check periodically that joints are not worn and joint connections have no leakage.
41
3 Maintenance