Gilera RCR 50 Manual Download | Manualshive

Page: 45 / 68

background image

PLASTIC SURFACES, TO PREVENT THEM LOSING THEIR SHINE AND ME-
CHANICAL CHARACTERISTICS.

WARNING

WHEN WASHING THE ENGINE WITH A HIGH-PRESSURE WATER JET:

• ONLY USE FAN SPRAY JETS.

• DO NOT PLACE THE WATER JET NOZZLE CLOSER THAN 60 CM.

• DO NOT USE WATER AT TEMPERATURES OVER 40° C.

• DO NOT DIRECT THE JETS DIRECTLY TO CARBURETTOR, WIRING, SLOT
DIFFUSER ON THE TRANSMISSION COVER AND SCROLL COVER.

Chrome-plated components washing

Wash using neutral shampoo and warm water cleaning the inner chassis with a
sponge to remove dirt. Do not rub emphatically. Rinse with warm water and dry. Once
the cleaning is complete, dry the components completely, to avoid water spots.

Finishing with protection paint

Apply the protective paint as soon as the first rusting signs appear. To obtain optimum
finishing, we recommend using a small brush and shaking the paint before its use.
Ensure the surface is clean and dry. Apply where impairment signs are seen. Do not
apply on surfaces around the impaired or scratched spot.

Wax slick

The waxed slicks of painted parts keep the original brightness of the vehicle. Wash
always the vehicle before this operation. Use always good quality silicone wax and
follow the precaution interactions of the manufacturer.

45

3 Maintenance

«
...
43
44
45
46
47
...
»

Summary of Contents for RCR 50





































































Reviews:

No comments

Related manuals for RCR 50

Brand: B-PWR Pages: 13

Yamaha X-MAX 300

Brand: BRUUDT Pages: 7

Virago XV1100K(C)

Brand: Yamaha Pages: 111

Brand: Yamaha Pages: 101

GRIZZLY 90 2020

Brand: Yamaha Pages: 132

Brand: Yamaha Pages: 132

Brand: Yamaha Pages: 166

Brand: Yamaha Pages: 452

Brand: Yamaha Pages: 132

Brand: Bajaj Pages: 44

R 1200 R Classic

Brand: BMW Pages: 1

Brand: DYNATEK Pages: 5

Brand: Arai Helmet Pages: 20

Brand: Can-Am Pages: 195

Brand: Buell Pages: 4

Brand: RIEJU Pages: 79

Brand: JAWA Pages: 40

Brand: Yamaha Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands