manualshive.com logo in svg

Gilera RCR 50, Manual

Share
Download
Gilera RCR 50 Manual Download Page 13

01_11

Gearshift pedal (01_11)

The gear pedal 

«1»

 is placed on the left side of the engine. Activate it with your foot

to firmly engage the gear. After the gear is shifted, remove the foot from the pedal and
this will return automatically to its initial position. Starting from the neutral position,
gears are inserted as follows:

- 1st gear is engaged by pressing the pedal downwards.

- 2nd, 3rd, 4th, 5th and 6th gears are engaged by pushing the pedal upwards.

For downshifting, pressing the pedal down.

CAUTION

THE GEAR PEDAL MUST BE OPERATED BY RELEASING IT AFTER HAVING
DISENGAGED THE CLUTCH AND REDUCING THE THROTTLE GRIP TO THE
MINIMUM.

01_12

Clutch control (01_12)

The lever of the clutch grip 

«A»

 is placed on the left side of the handlebar. When it is

pulled completely towards the handlebar, the clutch is disengaged and the engine
transmission is released. If the lever is released slowly, the clutch is engaged coupling
the engine to the transmission which, with a gear engaged, will transmit the engine
power to the rear wheel through the gear.

13

1 Vehicle

Summary of Contents for RCR 50





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands