Site Network Survey
Page A-2 MDE-5369E FlexPay™ IV (with Omnia) Programming and Service Manual · April 2020
3
Does the customer enforce any MAC filtering or Port Security policy in the site net?
YES NO
If the answer is YES, it may be required that you know in advance the MAC addresses of every Omnia to be installed on the site.
4
Is the Site running Applause? YES NO
If YES:
a
Is the Applause Media System Site Server directly connected with the customer site router or
is it connected to an intermediate router (normally Cisco RV042)?
MAIN ROUTER RV042
b
What is the IP address of the Applause Media System Site Server?
Applause IP Address
________ . ________ . ________ . ________
c
Is Applause Media System Site Server configured to use single NIC or dual NIC?
If the answer is dual NIC, convert the Applause system to a single NIC configuration, which may require an additional router (RV042
Firewall Router).
SINGLE NIC DUAL NIC
5
Draw a simple sketch of the site network topology.
6
Notify the site IT personnel that User Datagram Protocol (UDP) port 123 must remain open;
the Omnia platform requires the NTP access to the following locations:
• 0.debian.pool.ntp.org
• 1.debian.pool.ntp.org
• 2.debian.pool.ntp.org
• 3.debian.pool.ntp.org
Contact IT personnel to verify that the site router allows the connection to these servers. If an
NTP intercept is enabled on the router, the router must provide an answer to a time request
from Omnia in less than 100 ms to avoid a loop in which the time keeps changing on the
Omnia device.
