Installing Mat Reader Assembly
Page 22
MDE-4017G Mat Reader Assembly Kit (C00016-XXX) Installation Manual · April 2017
PIN Pad Mat Reader - with Pedestal and Without Hole in Countertop
Note: The pedestal serves as support for the PIN pad and mat reader. The PIN pad cable
(supplied with PIN pad) and Mat Reader Drive Cable (M01872A002) will be routed
between the mat reader and PIN pad, and secured to the outside of the pedestal.
1
If not already installed, use four screws to mount the PIN pad pedestal to the countertop.
2
Route the mat reader drive cable from the interface box beside the pedestal and through the
hole at the top of the base plate (see
).
3
Carefully connect the P1/P2 connector of the mat reader drive cable to the connector at the
back of the PIN pad mat reader (see
4
Route a Cable-tie (Q10178-01) through the designated hole in the PIN pad mat reader
(see
on
) and around the mat reader drive cable, and pull the cable-tie end
through its locking slot. This provides strain relief for the cable.
5
Route the PIN pad cable from the Passport system beside the pedestal across the top of the PIN
pad mat reader (see
on
6
Carefully connect the connector on the PIN pad cable to the connector at the back of the PIN
pad.
7
Insert the three M01677B010 Screws through the corresponding holes in the common adapter
plate, PIN pad mat reader, and screw into the corresponding holes in the base plate.
8
Align the three mounting holes at the bottom of the PIN pad over the three studs on the PIN
pad adapter plate.
9
Place the PIN pad on the PIN pad adapter plate so that the studs go into the PIN pad’s
mounting holes.
10
Gently slide the PIN pad down the PIN pad adapter plate so that the studs fit firmly into the
slot holes.
11
Secure the PIN pad cable from the Passport system and the mat reader drive cable to the
pedestal with cable-ties (see
on
).
12
Connect the loose end of the work area cable from the interface box to the P3 port on the USB
converter (refer to
MDE-4157 Passport Combined Cashier/Manager Workstation,
MDE-4158 Passport Cashier Workstation, and MDE-4159 Passport Standalone Manager
Workstation
).
