Installing Mat Reader Assembly
Page 16
MDE-4017G Mat Reader Assembly Kit (C00016-XXX) Installation Manual · April 2017
Installing C00016-011 Kit - Low Frequency (PIN Pad)
To install the C00016-011 Kit - Low Frequency (PIN Pad), proceed as follows:
Setting Baud Rate
To set the baud rate, proceed as follows:
1
Remove the mat reader interface box cover to access the Logic Board (M01803A001) as
shown in
Figure 13: Mat Reader Interface Box
Cover Screw
Cover
Logic Board
2
Locate the jump jacks on the logic board for mat reader (see
).
Figure 14: Jump Jacks for Baud Rate Setting on Logic Board
