76
Customer Service & Assistance
Gigaset SL400/400 A / IM-MEA EN / A31008-M2103-A601-2-UZ19 / appendix.fm / 10.11.2010
V
e
rsion 4, 16.0
9
.2005
Gigaset SL400A only:
Authorisation
This device is intended for connection to
analogue networks outside the EEA (with
the exception of Switzerland) depending on
national type approval.
Country-specific requirements have been
taken into consideration.
We, Gigaset Communications GmbH,
declare that this device meets the essential
requirements and other relevant regulations
laid down in Directive 1999/5/CE.
A copy of the 1999/5/EC Declaration of Con-
formity is available at this Internet address:
www.gigaset.com/docs
No time is specified for a message in the call list.
Date and time have not been set.
¥
Set the date/time (
The answering machine announces "PIN is
incorrect" during remote operation.
1. You have entered the wrong system PIN.
¥
Enter the system PIN again.
2. The system PIN is still set to 0000.
¥
Set the system PIN to something other
than 0000 (
The answering machine is not recording any
messages/has switched over to answer only.
Its memory is full.
¥
Delete old messages.
¥
Play back new messages and delete.
Exclusion of liability
Some displays may contain pixels (pic-
ture elements), which remain activated
or deactivated. As a pixel is made up of
three sub-pixels (red, green, blue), it is
possible that pixel colours may vary.
This is completely normal and does not
indicate an error.
